| Unit 5, Meadowbrook Park, Holbrook, Sheffield, S20 3PJ   Visit Our Showroom
                  
 
Call us on:
0114 251 1523
Availability: GOOD AVAILABILITY
Only %1 left

Genesis Aluminium Self Adhesive Ramps

SKU
TASCON
From £5.99 £4.99

This aluminium retro fit transition profile is incredibly easy to install without mechanical fixings, thanks to its self adhesive strip. The varying depths provide an easy solution of choice when bridging gaps and accommodating height differences in floor finishes. The TAS profile is very suitable for use with hard and smooth floor coverings.

  • Easy to install

  • Made from high-quality aluminium

  • Self adhesive

TAS157 - 50 x 15mm - 2.7m

TAS107 - 43 x 10mm - 2.7m

TAS159 - 50 x 15mm - 0.9m

TAS109 - 43 x 10mm - 0.9m

Finish Matt Silver, Matt Brass, Oak
Length 0.9m, 2.7m 
Width 25mm, 40mm
Depth 10mm, 15mm
Fitting Self Adhesive
Brand Genesis

Can These Be Cut To A Desired Length?

Yes, they can.

How Do I Install These? 

  1. Clean surface thoroughly ensuring removal of any contamination that may prevent the adhesion tape. NB it is important to remember that the safety strip will only stick to surfaces that are smooth and free form dirt and grease. 
  2. Cut to length, remove release paper from self-adhesive strip. 
  3. Place the profile into position, apply pressure along the full length to ensure adhesion. Do not attempt to re-position once the initial adhesion has taken place.

Do Surfaces Need To Be Prepped Prior To Installing These Step Edges? 

The safety strip will only stick to surfaces that are smooth and free form dirt, grease and debris.

Write Your Own Review
You're reviewing:Genesis Aluminium Self Adhesive Ramps